Anti-sticking additive CO-PLAS SL
Sliding additives CO-PLAS SL are used in films for packaging purposes to eliminate the effect of sticking when winding the film and for further storage. Affect the sliding of the individual layers of the film relative to each other, as well as the sliding on the metal parts of the equipment.
The additive based on polyamide is used in the production of films, on which no printing is subsequently applied.
Erucamide-based additive is used in the case where the film molding is followed by the printing process.
THE ADVANTAGE OF USING SLIDING ADDITIVES CO-PLUS:
The active substance content of up to 7%;
High efficiency;
PHYSICAL PROPERTY
Name of indicator |
SLO 01
|
SLE 01
|
Appearance, color |
Granules of natural color |
Granules of natural color |
Active substance |
oleamid |
erucamide |
Mass fraction of granules 2-6 mm in length and width, % not less |
97 |
97 |
MFI, g / 10 min at 190°C and 2.16 kg load |
0,3-7 |
0,3-7 |
Polymer matrix |
LDPE |
LDPE |
Active substance content,% |
7 |
7 |
Bulk density, g /cm |
0,6-0,7 |
0,6-0,7 |
Recommended amount of input: up to 2% by weight.
Packing: in polypropylene bags of 15 kg.