ADDITIVE PROCESSING CO-PLAS PR
Processing additive contains as active substance, the fluorinated elastomer. The additive concentrate is designed to solve the following tasks:
ADVANTAGE OF USING:
improving the surface quality of extruded products such as films, sheets, pipes (polymer), twine, etc. Eliminate the effect of “shark skin” when working at maximum extruder performance;
increase equipment performance by 5-10%;
pulsation of the melt during extrusion;
reducing pressure on the thrust bearing of the extruder;
reduction of energy consumption in the production of products;
improve film transparency;
the stability of thickness of;
reducing the level of contamination of the equipment;
temperature uniformity of the material during the melt
PHYSICAL PROPERTY
Name of indicator |
Value |
Appearance, color |
Granules of natural color |
Mass fraction of granules 2-6 mm in length and width,%, not less |
97 |
Polymer matrix |
LPE 318 |
MFI, g/10min. at 190 C, 2.16 kg |
0.1- 5 |
Active substance content % |
3.5 |
Bulk density, g/cm3 |
0,6 |
Recommended amount of input: in the initial period of work for the purpose of saturation of the surface of the extrusion tool (screw, cylinder, forming head), used “shock” dosage – 1-3% of the mass. when reducing the load on the thrust bearing of the extruder-0,1-0,3% mass.
Packing: in polypropylene bags of 15 kg.